|
Двухдиапазонные точки доступа AP-124 и AP-125 стандарта IEEE 802.11a/b/g/n для внутренней установки. Разработаны для развертывания сетей Wi-Fi внутри зданий, могут монтироваться в разнличных условиях: выше перекрытий, в защитных кожухах и пр. Точки доступа обеспечивают агрегатную скорость до 300Мбит/c. Точки доступа имеют антенную систему типа 3×3 MIMO, двухканальные двухдиапазонные 2.4/5ГГц радиомодули, при этом AP-124 снабжена разъемами SMA-female для подключения внешних антенн, а AP-125 имеет интегрированные антенны. AP-124 и AP-125 имеют по два Ethernet-интерфейса (100/1000BASE-T) и поддерживают стандарт IEEE 802.3af (PoE), а также могут питаться с использованием внешнего адаптера. Технические характеристики точек доступа Aruba AP-124/AP-125 Application 802.11n indoor AP designed for maximum deployment flexibility in high-density environments that require above-ceiling or enclosure-based installations. Operating Mode 802.11a/b/g/n AP, air monitor (AM) and Remote AP (RAP) Spectrum monitor, AM and RAP AM and RAP Remote AP Radios Software-configurable dual radio capable of supporting 2.4 GHz and 5 GH RF Management Automatic transmit power and channel management control with auto coverage hole correction via Adaptive Radio Management (ARM) Spectrum analysis remotely scans the 2.4-GHz and 5-GHz radio bands to provide increased visibility into non-802.11n RF interference sources and their effect on 802.11n channel quality. Antenna AP-124: Three RP-SMA interfaces for external antenna support (supports up to 3x3 MIMO with spatial diversity) AP-125: Integrated, tri, omni-directional multiband dipole antenna elements (supports up to 3x3 MIMO with spatial diversity) AP-125 Antenna Maximum Gain: 2.4 to 2.5 GHz / 3.2 dBi, 5.150 to 5.875 GHz / 5.2 dBi Interfaces Network: 2 x 100/1000Base-T Ethernet (RJ45), auto-sensing link speed and MDI/MDX Accepts 48 V DC 802.3af or 802.3at or PoE+ interoperable Power-over-Ethernet (PoE-PD) on either port Antenna (model AP-124 only): 3 x RP-SMA antenna interfaces (supports up to 3x3 MIMO with spatial diversity) Other: 1 x RJ-45 console interface Wireless Radio Specifications | AP type: | Dual-radio, dual-band 802.11n indoor | | Supported Frequency Bands (country-specific restrictions apply): | 2.400 - 2.4835 GHz 5.150 - 5.250 GHz 5.250 - 5.350 GHz 5.470 - 5.725 GHz 5.725 - 5.850 GHz | | Available Channels: | Controller-managed, dependent upon configured regulatory domain | | Supported Radio Technologies: | 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM) 802.11n: 3x3 MIMO with 2 spatial streams | | Supported Modulation Types: | 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM | | Transmit Power: | Configurable in increments of 0.5 dBm | | Maximum Transmit Power: | 2.4GHz: 23 dBm (limited by local regulatory requirements) 5 GHz: 22 dBm (limited by local regulatory requirements) | | Association Rates (Mbps): | 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps) | | 802.11n High-Throughput (HT) Support: | HT 20/40 | | 802.11n Packet Aggregation: | A-MPDU, A-MSDU |
|