| Hardware Interface | - 5 x 10/100/1000M Base-T LAN Switch, RJ-45
- (LAN A3 for PoE Indoor Use)
- 1 x USB 2.0 Host
- 2 x Detached Antennas
- 1 x Factory Reset Button
- 1 x Wireless ON / OFF / WPS Button
- 1 x Power ON / OFF Button
| | Wi-Fi Frequency | 11b/g/n : - 2.412 ~ 2.462GHz (USA)
- 2.412 ~ 2.472GHz (Europe ETSI)
11a/an/ac : - 5.150 – 5.250 & 5.725 – 5.825 GHz (USA)
- 5.150 – 5.250 & 5.470 – 5.725GHz (Europe ETSI)
| | Wireless Transmit Power | 2.4GHz Max : 18 dBm 5 GHz Max : 19 dBm | | Temperature | Operating : 0°C ~ 40°C Storage : -20°C ~ 60°C | | Humidity | 10% ~ 90% ( non-condensing ) | | Power Adapter | DC12V@1A | | Max. Power | 12 watt | | Dimension | W157 * H30 D127 ( mm ) | | Voltage of 802.3af PoE | 44v~57v | Wireless AP - Band 2.4GHz
- IEEE802.11b/g/n compliant
- 11b only
- 11g only
- 11n only
- Mixed (11b+11g)
- Mixed (11g+11n)
- Mixed (11b+11g+11n)
- Operation Mode:
- AP
- Station Infrastructure
- AP Bridge Point to Point
- AP Bridge Point to Multi-point
- AP Bridge WDS (Wireless Distribution System)
- Universal Repeater
- Band 5GHz
- IEEE802.11a/n and IEEE802.11ac draft compliant
- 11a only
- 11n only
- Mixed (11a+11n)
- Mixed (11a+11n+11ac)
- Operation Mode:
- Support up to 64 Wireless Clients per band
- Multiple SSID
- Hidden SSID
- Wireless Isolation
- VLAN Grouping and SSID mapping for LAN A & B
- MAC Clone
- Security Mode
- Open (Disable)
- 64/128-bit WEP
- WPA/PSK
- WPA2/PSK
- Mixed mode(WPA+WPA2)/PSK
- 802.1X
- Encryption: AES/TKIP
- 802.1x authentication
- Internal RADIUS Server support PEAP
- RADIUS Proxy support TLS & PEAP
- Internal Radius Server
- MAC Address Control
- Support total 256 entries
- WPS mode
- AP Discovery
- WMM
- Station List
- Bandwidth Management
- Airtime Fairness
- Roaming
- PMK-Caching
- Pre-Authentication
- Station Control
- DrayTek WLAN Security default settings (Refer to Default Configuration Section):
PSK write method follow MAC address mechanism Telnet command to: - Read PSK from flash (*similar with MAC Address read method)
- Disable/Enable WLAN security, for test mode
USB - Printer Server
- Support temperature sensor
Network Management - Web-based User Interface (HTTP/HTTPS)
- CLI (Command Line Interface, Telnet)
- Configuration Backup/Restore
- Firmware Upgrade via HTTP/TR-069
- Syslog/Mail Alert
- DHCP Server & Client
- TR069 (Compliant with VigorACS SI)
- AP Management (with Vigor Series Routers)
Hardware Interface - 5 x 10/100/1000M Base-T LAN Switch, RJ-45 (LAN A3 for PoE Indoor Use)
- 1 x USB 2.0 Host with current limit 170mA
- 2 x SMA Detached Antennas
- 1 x Factory Reset Button
- 1 x Wireless ON / OFF / WPS Button
- 1 x Power ON / OFF Button
|