|
Technical specifications
Interfaces and connectors
-
1 x embedded interface GPRS/EDGE/UMTS/HSPA+/DC-HSPA+/LTE (depending on the router model)
-
Dual SIM card slot: 2 x Mini-SIM (2FF), SIM holders are inside the router housing
-
1 or 2 SMA female connectors (50 Ω) for external antennas (depending on the router model)
-
1 x Ethernet interface 10/100 Base-T (LAN)
-
1 x RS-232 / RS-485 4-wire / RS-485 2-wire; configuration: DCE / Full-Duplex / Half-duplex; DSUB9 female connector
-
1 x RS-232 / RS-485 4-wire; configuration: DCE / Full-Duplex; RJ45 connector
-
1 x digital input; 6 V min, 48 V max, optocoupler IR diode; FCI 20020110-H041A01LF connector
-
1 x digital output; 48 V max. optocoupler open drain with 500 mA resettable PTC fuse, FCI 20020110-H041A01LF connector
RF characteristics
1) GWR-I352 – 4G LTE model
LTE
-
LTE FDD: 800/850/900/1800/2100/2600 MHz
-
LTE TDD: 2300/2500/2600 MHz
UMTS/HSPA+/DC-HSPA+
GSM/GPRS/EDGE
2) GWR-I352 – 3G HSPA+ model
UMTS/HSPA+
-
800/850/900/1900/2100 MHz
GSM/GPRS/EDGE
Status LED
-
Ethernet activity/network traffic
-
Power on
-
GSM link activity
-
Signal quality
-
Reset
Power
-
Input: 12-48 VDC
-
Input protection: Reverse polarity, transients, overcurrent (internal 1 A time-lag fuse)
-
FCI 20020110-H021A01LF connector
Environmental
-
Operating temperature: -20°C to +70°C (-4°F to 158°F)
-
Storage temperature: -40°C to +85°C (-40°F to 185°F)
-
Relative humidity: 5% to 95% (non-condensing)
-
IP rating: IP40
-
Ethernet isolation: 1.5 kV RMS
-
Serial ports protection (ESD): +/- 15 kV (IEC 61000-4-2 Air Gap)
Physical
-
Dimensions (L x W x H): 104 x 50 x 135 mm
-
Weight with 2 antennas: 540 gr
-
Housing: Plastic coated 0.8 mm steel sheet, black; DIN rail mounting kit
Accessories (included)
-
Matching power connector: FCI 20020006-H021B01LF (female, 2 pins)
-
Matching GPIO connector: FCI 20020006-H041B01LF (female, 4 pins)
-
GSM antenna, frequency: 698-960 / 1710-2700 MHz, 1 or 2 pcs depending on the router model
-
Ethernet UTP cable
-
DIN rail mounting kit
|